Crosslinkable high dielectric constant polymer dielectrics for low voltage organic field‐effect transistor memory devices

I n this study, we successfully synthesized water/methanol soluble random copolymers with a high dielectric constant, poly(n‐(hydroxymethyl) acrylamide‐co‐5‐(9‐(5‐(diethylamino)pentyl)?2‐(4‐vinylphenyl)?9H‐fluorene(P(NMA‐co‐F6NSt)), which contained chemical crosslinkable segment (NMA) and hole trapping building block (F6NSt). The feeding molar ratios of two monomers (NMA:F6NSt) were set as 100:0, 95:5, 80:20, and 67:33 for the copolymers of P1 , P2 , P3, and P4 , respectively. The crosslinked P(NMA‐co‐F6NSt) thin film could serve as both dielectric and charge storage layers in organic field‐effect transistor (OFET) memory device and exhibited high k (i.e., 4.91–6.47) characteristics, leading to a low voltage operation and a small power consumption. Devices based on the P1 ‐ P4 dielectrics showed excellent insulating properties and good charge storage performance under a low operating voltage in a range of ±5V because of tightly network structures and well‐dispersed trapping cites. In particular, P3 ‐based memory device exhibited a large memory window of 4.13 V with stable data retention stability over 10⁴ s, a large on/off ratio of 10⁴, and good endurance characteristics as high as 200 cycles. The above results suggested that a high‐performance OFET memory device could be facilely achieved using the novel crosslinkable high‐k copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3224–3236     

Low band‐gap D–A conjugated copolymers based on anthradithiophene and diketopyrrolopyrrole for polymer solar cells and field‐effect transistors

Two conjugated copolymers PADT‐DPP and PADT‐FDPP based on anthradithiophene and diketopyrrolopyrrole, with thiophene and furan as the π‐conjugated bridge, respectively, were successfully synthesized and characterized. The number‐averaged molecular weights of the two polymers are 38.7 and 30.2 kg/mol, respectively. Polymers PADT‐DPP and PADT‐FDPP exhibit broad absorption bands and their optical band gaps are 1.44 and 1.50 eV, respectively. The highest occupied molecular orbital energy level of PADT‐DPP is located at ?5.03 eV while that of PADT‐FDPP is at ?5.16 eV. In field‐effect transistors, PADT‐DPP and PADT‐FDPP displayed hole mobilities of 4.7 × 10^?3 and 2.7 × 10^?3 cm²/(V s), respectively. In polymer solar cells, PADT‐DPP and PADT‐FDPP showed power conversion efficiency (PCE) of 3.44% and 0.29%, respectively. Atomic force microscopy revealed that the poor efficiency of PADT‐FDPP should be related to the large two‐phase separation in its active layer. If 1,8‐diiodooctane (DIO) was used as the solvent additive, the PCE of PADT‐DPP remained almost unchanged due to very limited morphology variation. However, the addition of DIO could remarkably elevate the PCE of PADT‐FDPP to 2.62% because of the greatly improved morphology. Our results suggest that the anthradithiophene as an electron‐donating polycyclic system is useful to construct new D–A alternating copolymers for efficient polymer solar cells. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1652–1661     

Study of Viscosity-temperature Properties of Oil and Gas-condensate Mixtures in Critical Temperature Ranges of Phase Transitions

Transport of oil and gas-condensate mixtures of various compositions is found to be accompanied by a slight increase in viscosity in the coldest period when ground temperatures at depth of a condensate pipeline reach 0 – minus 4°С. Fall in temperature of oil fluids under study to minus 10 – minus 30°С is accompanied by a sharp increase in all structural and rheological parameters of the mixture. Even a slight amount of oil added to a gas-condensate mixture causes a significant decrease in viscosity in the negative temperature range. As a result, cloud and pour point of a mixture falls, its amount decreases, the structure of paraffin deposits changes.     

衰减振荡电流下火花电阻的光谱诊断

气体开关是脉冲功率系统的关键部件,开关的火花通道阻抗直接影响负载电压的陡度及其能量传输效率。提出一种光谱学诊断方法,通过对火花通道成像光谱的时空分辨测量,获得通道半径及电导率,从而计算时变的火花电阻。光谱测量结果表明,氮气间隙火花放电通道电子温度为2~3eV,通道电导率先增大后减小,最大值约16 000S,随着放电发展,火花通道电阻从绝缘状态快速跌落并趋于稳定值,时变趋势与电学计算结果基本吻合。3~100kPa范围内,随着气压增大,放电通道半径减小,火花通道电阻增大。     

Thickness dependence of thermally induced changes in surface and bulk properties of Nafion® nanofilms

Thermally induced changes in surface wettability, dewetting behavior, and proton transport of “self‐assembled” nanothin Nafion^® films (4–300 nm) on SiO₂ substrate is reported. Thermal annealing induces switching of the surface wettability of 55 nm and thinner films from hydrophilic to super‐hydrophobic. Thickness dependence of this behavior is observed with higher annealing temperature required for lower thickness films, indicating highly restrictive mobility of Nafion^® ionomer as film thickness decreases. Dewetting is only observed for 4‐nm thin film. Significant suppression in proton conductivity upon thermal annealing was noted. Similarly, two other bulk properties, water uptake and swelling, were found to decrease upon annealing. This work reports a systematic examination of the thickness dependence of thermally induced changes in both surface and bulk properties of ultra‐thin Nafion^®. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1267–1277     

Enhanced magnetoconductivity and electrical property of MWCNT-CdS nanocomposite embedded in polyaniline

PANI/MWCNT-CdS nanocomposites with different content of CdS wt.% has been synthesized by the chemical oxidative in-situ polymerization reaction of aniline in the presence of multi-walled carbon nanotubes (MWCNT). TEM, XRD, FTIR, and TGA studies were done for the structural and thermal characterization of the samples respectively. The particle size of CdS nanoparticles distributes in between 2.7 and 4.8 nm. XRD spectrum reveals that the co-existence of MWCNT, CdS in PANI matrix, where CdS forms a hexagonal structure. TGA result shows that nanocomposite becomes more thermally stable with the increase in CdS content. The dc electrical transport property of PANI/MWCNT-CdS nanocomposites has been investigated within a temperature range 77 ≤ T ≤ 300 K. The dc conductivity follows a 3D variable range hopping (VRH) model. A large magnetoconductivity change (19%) is observed for 2 wt% CdS content in PANI/MWCNT-CdS, which is explained by the wave function shrinkage model.     

Aromatic components produced by non-Saccharomyces Cerevisiae derived from natural fermentation of grape

Aromatic components are important functional products during the wine fermentation process. In the current study, nine strains (Y10, Y5, Y21, Y2, Y19, Y16, Y3, Y13 and Y4) of non-Saccharomyces were isolated from Cabernet Sauvignon grape wine. Aromatic components from Cabernet sauvignon-fermented wine were determined the phylogenetic evolution status of different non-Saccharomyces based on 26S rDNA and D1/D2 sequence analysis and analysed by a gas chromatography–mass spectrometry analysis, and they were grouped into one category with four different yeast genus which were Meyerozyma guilliermondii, Brettanomyces naardenensis, Pichia guilliermondi and Candida fermentati. A total of 102 kinds of aroma components were detected, including 39 kinds of esters, 31 kinds of alcohols, 8 kinds of ketones, 10 kinds of alkanes, 15 kinds of acids and 4 kinds of other aroma substances.     

Enantioselective comprehensive two‐dimensional gas chromatography. A route to elucidate the authenticity and origin of Rosa damascena Miller essential oils

The analysis of Bulgarian and Turkish Rosa damascena Miller essential oils was performed by flow‐modulated comprehensive two‐dimensional gas chromatography using simultaneous detection of the second column effluent by flame ionization and quadrupole mass spectrometric detection. Enantioselective separations were obtained by running the samples on 2,3‐di‐O‐ethyl‐6‐O‐tert‐butyldimethylsilyl‐β‐cyclodextrin column as the first column and on polyethylene glycol as the second column. The determination of enantiomeric or diastereomeric excess of some terpenoic solutes is a possible route for quality or authenticity control as well as for the elucidation of the country of origin.     

Tuning CO2 Uptake and Reversible Iodine Adsorption in Two Isoreticular MOFs through Ligand Functionalization

The synthesis and characterization of two isoreticular metal–organic frameworks (MOFs), {[Cd(bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 1 ) and {[Cd(2‐NH₂bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 2 ) [bdc=benzene dicarboxylic acid; 2‐NH₂bdc=2‐amino benzene dicarboxylic acid; 4‐bpmh=N,N‐bis‐pyridin‐4‐ylmethylene‐hydrazine], are reported. Both compounds possess similar two‐fold interpenetrated 3D frameworks bridged by dicarboxylates and a 4‐bpmh linker. The 2D Cd‐dicarboxylate layers are extended along the a‐axis to form distorted square grids which are further pillared by 4‐bpmh linkers to result in a 3D pillared‐bilayer interpenetrated framework. Gas adsorption studies demonstrate that the amino‐functionalized MOF 2 shows high selectivity for CO₂ (8.4 wt % 273 K and 7.0 wt % 298 K) over CH₄, and the uptake amounts are almost double that of non‐functional MOF 1 . Iodine (I₂) adsorption studies reveal that amino‐functionalized MOF 2 exhibits a faster I₂ adsorption rate and controlled delivery of I₂ over the non‐functionalized homolog 1 .